Danfoss offers an extensive range of radiator valves. Robustly built and designed to meet the rigors of the commercial and industrial sectors, a comprehensive range of RA2000 radiator thermostats is available for practically all systems and installation conditions.
The radiator valves with pre-setting ensure optimum distribution of the water and the result is increased comfort and reduced energy consumption.
Danfoss Dynamic Valve™, the innovative 2-in-1 pressure independent radiator valve that ensures both optimal temperature control as well as creating automatic hydronic balance in two-pipe heating systems – all in a single valve.
Technical details about our range
You save nothing by having one on full throttle and the others closed. In fact, a fully heated radiator will use more heat than 2 or 3 that are turned only a quarter of the up. This is especially true when you use district heating.
When ventilating a room, turn down your thermostat and leave the windows open for 5-6 minutes. If you don’t turn down your thermostat, it will react to the draft by heating up automatically.
Always maintain a minimum of 16 degrees in all rooms. Never go below 14 degrees; this might damage the building and cause dampness, condensation and mold.
Save energy and money by turning your radiators down 2-3 degrees at night. But remember: If you turn them down more than 3 degrees, the money you could save will be used on reheating the room again.
Search for data sheets, instructions, certificates, leaflets and more
Technical information according to EN 215
Do you have a questions for us about the above products? Or would you like to get a quote from us?
We kindly ask you to contact your local Danfoss sales office, so we can serve you in the best possible way in your own language.